Products 33-48 of 56
Show
Availability: In Stock
Item #: 010606 -
The Racer X Fabrication 1ZZ crank trigger kit for the 1991-1995 Toyota MR2 is the best ignition solution for high performance 3SGTE engines. The crank trigger kit will eliminate high RPM ignition drift, which can be as much as 5 to 10 degrees above 6000 RPM. This kit will allow you to run optimal timing without worry about your timing belt stretching and giving erratic readings to the OEM distributor. The 1ZZ coils also eliminate the need to change your spark plug wires, distributor cap and...
Availability: In Stock
Item #: 010602 -
The Racer X Fabrication 1zz valve cover adapter plate for the 91-95 Toyota MR2 allows you to easily adapt the 1zz coils to the Gen 2 and Gen 3 valve cover. The adapter plate comes with the hardware needed to complete the installation. *Note: If you are using the OEM intake manifold the coil adapter plate will require modification on coil #2 to clear the throttle body inlet. What's Included (1) 1ZZ valve cover adapter plate Compatibility 1991-1995 Toyota MR2 (Gen 2, Gen 3, Gen 4) Installation...
Availability: In Stock
Item #: 011002 -
The Racer X Fabrication BSPT oil pressure sensor adapter for the 1991-1995 Toyota MR2 / Celica was designed to eliminate the various fittings and adapters needed to use an aftermarket gauge. The OEM cylinder head for the 3SGTE is threaded using an 1/8" BSPT, which can cause several issues when trying to retain the OEM oil pressure sensor and add an aftermarket pressure gauge. The Racer X Fabrication BSPT adapter conveniently allows you to add an aftermarket gauge and keep the OEM oil pressure...
Availability: Discontinued
Item #: 011001 -
The Racer X Fabrication oil level block off plate for the 1991-1995 Toyota MR2 eliminates the OEM oil level sensor. The OEM oil level sensor is often removed by enthusiasts and replaced with sheet metal plates. Enter the Racer X oil level block off, the block off plate is CNC machined from 6061-T6 aluminum and includes a new o-ring seal. The block off plate works on the OEM MR2 oil pan or the Moroso oil pan. What's Included (1) Racer X oil level block off plate (1) O-ring (4) M6x1 SS button...
Availability: In Stock
Item #: 010006 -
The Racer X Fabrication press in AN fitting for the 1991-1995 Toyota MR2 is designed to remove the OEM PCV fittings and replace them with hose end fittings. The fitting is CNC machined to be a press fit into the Gen 2, Gen 3, and Gen 4 OEM valve cover. The AN fittings make it simple and easy to covert the OEM rubber lines to braided hose and AN hose ends. Please be sure to select the correct fitting for the Gen 3 and Gen 4 applications as the PCV and Crankcase fittings are different sizes....
Availability: In Stock
The Racer X Fabrication crank trigger wheel for the 1991-1995 Toyota MR2 is a direct replacement trigger wheel for the Racer X MR2 crank trigger kit. The trigger wheels come in standard 12 tooth, 36-1, and 60-2 trigger wheels. What's Included (1) Racer X 430 Stainless steel trigger wheel Compatibility 1991-1995 Toyota MR2 Installation Install Time: 1 hour Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X...
Availability: In Stock
Item #: 0X0703 -
What's Included (4) Injector adatper 11mm - 14mm Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 4 Toyota MR2 Gen 5 Installation Install Time: 30 mins - 1 hour Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
New!
Availability: In Stock
Item #: 010708 -
The Racer X Fabrication fuel pump relay bracket for the 91-95 Toyota MR2 is designed to clean up the engine bay. The bracket allows you to eliminate the OEM fuel injector resistor pack and then mount the fuel pump relay and fuel pump resistor pack onto the Racer X Fabrication bracket. The bracket is CNC laser cut from 6000 series aluminum and is powder coated wrinkle black for corrosion resistance and an OEM appearance. **NOTE** This product will eliminate the OEM injector resistor pack,...
Availability: In Stock
Item #: 0X1101 -
The Racer X "Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...
Availability: In Stock
Item #: 0X1102 -
The Racer X "Fury" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Fury" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...
Availability: In Stock
Item #: 0X1103 -
The Racer X "Destructor" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Destructor" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...
Availability: Out of Stock
Item #: 010016 -
The Racer X Fabrication cam cap for the 1991-1995 Toyota MR2 for the 3SGTE engine was designed as a direct replacement for the OEM cam cap. The OEM cap is typically quite worn and usually the torx bit bolts are stripped making removal difficult. The Racer X cam cap is CNC machined from 6061-T6 aluminum and is cut to the same dimensions as the OEM component. The cap includes new bolts, which are not a common thread size. The replacement is a great way to clean up your engine bay or replacement...
Availability: In Stock
Item #: 010707 -
The Racer X Fabrication OEM FPR adapter for the 1991-1995 Toyota MR2 will allow you to replace your fuel rail and retain the OEM fuel pressure regulator. When it comes time to replace your OEM fuel rail with a top feed fuel rail for the Gen 2 or Gen 3 it often means replacing your OEM FPR as well. The Racer X FPR adapter allows you to retain the OEM fuel pressure regulator and simplify your installation. The FPR adapter is threaded for -8AN rails (3/4-16) and features a viton o-ring seal that...
New!
Availability: In Stock
Item #: 010404 -
The Racer X Fabrication rear strut tower caps for the Toyota MR2 were designed to keep dust and debris out, while allowing room for aftermarket coilovers. What's Included (2) Racer X strut tower cap Compatibility 1991-1995 Toyota MR2 Installation Install Time: 5 minutes Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on...
Availability: In Stock
Item #: 011406 -
What's Included (1) Shift lever side bushing Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 2 Toyota MR2 Gen 3 Toyota MR2 Gen 4 Installation Install Time: 15 to 30 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
Availability: In Stock
Item #: 010002 -
The Racer X Fabrication throttle body inlet for the 1991-1995 Toyota MR2 is a direct replacement for the OEM throttle body inlet. The OEM throttle body inlet is smaller than the throttle body opening which creates a small restriction before entering the throttle body. The Racer X throttle body inlet matches the OEM throttle body opening for the Gen 2 and Gen 3 which reduces the airflow restriction through the throttle body. The flange is CNC machined from 6061-T6 aluminum and welded to your...