Products 97-112 of 174
Show
Availability: In Stock
Item #: 011002 -
The Racer X Fabrication BSPT oil pressure sensor adapter for the 1991-1995 Toyota MR2 / Celica was designed to eliminate the various fittings and adapters needed to use an aftermarket gauge. The OEM cylinder head for the 3SGTE is threaded using an 1/8" BSPT, which can cause several issues when trying to retain the OEM oil pressure sensor and add an aftermarket pressure gauge. The Racer X Fabrication BSPT adapter conveniently allows you to add an aftermarket gauge and keep the OEM oil pressure...
Availability: Out of Stock
Item #: 011001 -
The Racer X Fabrication oil level block off plate for the 1991-1995 Toyota MR2 eliminates the OEM oil level sensor. The OEM oil level sensor is often removed by enthusiasts and replaced with sheet metal plates. Enter the Racer X oil level block off, the block off plate is CNC machined from 6061-T6 aluminum and includes a new o-ring seal. The block off plate works on the OEM MR2 oil pan or the Moroso oil pan. What's Included (1) Racer X oil level block off plate (1) O-ring (4) M6x1 SS button...
New!
Availability: In Stock
Item #: 0X1003-6 -
The Racer X Fabrication catch can for the 2020+ Toyota Supra was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air oil mixture from the PCV or crankcase, and through a series of baffles, retains the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they are diverted around the spring/inlet tube. This initial diversion creates a swirling effect that...
Availability: In Stock
Item #: 060405 -
The Racer X Fabrication rear toe links for the 2020+ Toyota Supra offer the ability to give your vehicle proper toe adjustment after changing your camber beyond OEM specifications. The toe links feature chromoly rod ends and eccentric lock-outs that allow for all adjustment to be made from the toe link body. The rear toe links are CNC machined from 6061-T6 aluminum to reduce weight, improve strength and increase rigidity. Comes standard anodized black for corrosion resistance. What's Included...
Availability: In Stock
Item #: 010006 -
The Racer X Fabrication press in AN fitting for the 1991-1995 Toyota MR2 is designed to remove the OEM PCV fittings and replace them with hose end fittings. The fitting is CNC machined to be a press fit into the Gen 2, Gen 3, and Gen 4 OEM valve cover. The AN fittings make it simple and easy to covert the OEM rubber lines to braided hose and AN hose ends. Please be sure to select the correct fitting for the Gen 3 and Gen 4 applications as the PCV and Crankcase fittings are different sizes....
Availability: In Stock
Item #: 020405-B -
What's Included (1) Tapered stud and hardware Compatibility Racer X FR-S / BRZ / GT86 Rear Toe Links Racer X 22+ BRZ / GR86 Rear Toe Links Racer X WRX / STI Rear Toe Links Install Time: Install Time: 1 hour Alignment recommended after installation. Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
Availability: In Stock
Item #: 060406 -
The Racer X Fabrication rear end links for the 2020 Toyota Supra are perfect for enthuisists who are looking to stiffen the rear of the vehicle and want adjustability. Construction The rear end links are CNC machined from 6061-T6 aluminum and feature teflon lined rod ends with pressed studs. The completed assembly increases stiffness and strength over the OEM rear end links. The end links come standard with a black anodized finish to prevent corrosion. What's Included (2) Rear end link...
Availability: In Stock
The Racer X Fabrication crank trigger wheel for the 1991-1995 Toyota MR2 is a direct replacement trigger wheel for the Racer X MR2 crank trigger kit. The trigger wheels come in standard 12 tooth, 36-1, and 60-2 trigger wheels. What's Included (1) Racer X 430 Stainless steel trigger wheel Compatibility 1991-1995 Toyota MR2 Installation Install Time: 1 hour Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X...
Availability: In Stock
Item #: 0X0703 -
What's Included (4) Injector adatper 11mm - 14mm Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 2 Toyota MR2 Gen 3 Installation Install Time: 30 mins - 1 hour Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
Availability: In Stock
What's Included (2) Supra decals (2) Supra "S" decals Compatibility 2020+ Toyota Supra Installation Install Time: 5 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. --> ...
New!
Availability: In Stock
Item #: 010708 -
The Racer X Fabrication fuel pump relay bracket for the 91-95 Toyota MR2 is designed to clean up the engine bay. The bracket allows you to eliminate the OEM fuel injector resistor pack and then mount the fuel pump relay and fuel pump resistor pack onto the Racer X Fabrication bracket. The bracket is CNC laser cut from 6000 series aluminum and is powder coated wrinkle black for corrosion resistance and an OEM appearance. **NOTE** This product will eliminate the OEM injector resistor pack,...
Availability: In Stock
Item #: 0X1101 -
The Racer X "Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...
Availability: In Stock
Item #: 0X1101-D -
The Racer X "Delrin Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined Derlrin and the adjustable aluminum adapter is threaded for an M12 x 1.25 thread pitch. It is laser etched with your choice of shift pattern and color. Weight is approximately 3.9 ounces. What's Included (1) Racer X "Delrin Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation...
Availability: In Stock
Item #: 0X1102 -
The Racer X "Fury" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Fury" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...
Availability: In Stock
Item #: 0X1103 -
The Racer X "Destructor" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Destructor" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...
Availability: Out of Stock
Item #: 010016 -
The Racer X Fabrication cam cap for the 1991-1995 Toyota MR2 for the 3SGTE engine was designed as a direct replacement for the OEM cam cap. The OEM cap is typically quite worn and usually the torx bit bolts are stripped making removal difficult. The Racer X cam cap is CNC machined from 6061-T6 aluminum and is cut to the same dimensions as the OEM component. The cap includes new bolts, which are not a common thread size. The replacement is a great way to clean up your engine bay or replacement...