TRANSMISSION

The Racer X Fabrication performance shifter was designed specifically for the 1991-1995 Toyota MR2. The Racer X shifter eliminates the OEM polymer cup which is often found completely worn out and falling apart after 30 years. The shift lever is cut from 7075-T6 aluminum and features a large oval pocket for extra clearance around the bell crank at the base. It uses an oil impregnated bronze insert for low friction rotation and effortless shifting. The base components are machined from 6061-T6...

The Racer X Fabrication shifter box for the 1991-1995 Toyota MR2 was created to replace the worn out OEM shifter box assembly. The OEM shifter box assembly is typically rusted, the bell crank bushing pin is worn from years of use and the polymer shifter cup is sloppy. Introducing the Racer X shift box, we started with the mounting plate that is bolted to the body. The mounting plate is CNC machined from 6061-T6 aluminum and it eliminates the rubber grommets or shifter base bushings to provide...

The Racer X Fabrication shifter cable bushing kit for the 1991-1995 Toyota MR2 is designed to enhance shifting feedback and feel. The OEM bushings are comprised of rubber and after 25 years are worn out and tired. The shifter bushing kit is CNC machined from 6061-T6 aluminum and holds a teflon spherical bearing (not found in other kits). The Racer X kit also uses our custom bushing spacers which provides a greater amount articulation and reduces binding even further over the flat washer...

The Racer X Fabrication shifter cable bushing spacers for the 91-95 Toyota MR2 are specifically designed to allow a greater amount of articulation not found in the standard kit using flat washers. The bushing spacers also eliminate the small amount of movement between the spacers and cotter pin. These changes lead to an improved shifting feedback and reduces binding in the cables which is often described by enthusiasts as a notchy shifter. The spacers are CNC machined from 6061-T6 aluminum to...

The Racer X Fabrication transmission linkage bushings for the 1991-1995 Toyota MR2 are a direct OEM replacement for the worn out polymer bushings found in the OEM shifter linkage assembly. After 30 years of use, the OEM bushings are almost completely worn out which leads to a sloppy or disconnected feeling during shifting. The Racer X linkage bushings are designed specifically for the E153 transmission and CNC machined from oil impregnated bronze. The bronze bushings provide crisp, direct feed...

What's Included (2) Urethane bushing (2) Retaining washer Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 2 Toyota MR2 Gen 3 Toyota MR2 Gen 4 Installation Install Time: 15 to 30 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X "Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Delrin Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined Derlrin and the adjustable aluminum adapter is threaded for an M12 x 1.25 thread pitch. It is laser etched with your choice of shift pattern and color. Weight is approximately 3.9 ounces. What's Included (1) Racer X "Delrin Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation...

The Racer X "Fury" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Fury" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Destructor" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Destructor" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

What's Included (1) Shift lever side bushing Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 2 Toyota MR2 Gen 3 Toyota MR2 Gen 4 Installation Install Time: 15 to 30 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...