IGNITION SYSTEM

The Racer X Fabrication 1ZZ coil on plug kit for the 1991-1995 Toyota MR2 will eliminate high RPM ignition drift, which can be as much as 5 to 10 degrees above 6000 RPM. This kit will allow you to run optimal timing without worrying about your timing belt stretching and giving erratic readings to the OEM distributor. The 1ZZ coils also eliminate the need to change your spark plug wires, distributor cap and rotor every 3000 miles. The cam trigger portion of the coil on plug kit eliminates the...

The Racer X Fabrication distributor cover for the 91-95 Toyota MR2 is perfect for those that have eliminated the need for the OEM distributor cap and are now using a crank trigger for your ignition timing. The aluminum cover simple bolts on to the OEM distributor just like the OEM cap. What's Included (1) Aluminum distributor cover Compatibility 1991-1995 Toyota MR2 Installation Install Time: 15 min Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.go...

The Racer X Fabrication Cam trigger kit for the 1991-1995 Toyota MR2 provides the final component for those that are still using the OEM distributor and an external crank trigger wheel. The cam trigger kit eliminates the OEM distributor completely, and allows your EMS to run full sequential ignition and fuel. The Racer X Fabrication cam trigger wheel utilizes a CNC machined adapter that keys to the intake cam of the 3SGTE engine. The cam wheel rotates from the keyed adapter through (2) sealed...

The Racer X Fabrication 1ZZ crank trigger kit for the 1991-1995 Toyota MR2 is the best ignition solution for high performance 3SGTE engines. The crank trigger kit will eliminate high RPM ignition drift, which can be as much as 5 to 10 degrees above 6000 RPM. This kit will allow you to run optimal timing without worry about your timing belt stretching and giving erratic readings to the OEM distributor. The 1ZZ coils also eliminate the need to change your spark plug wires, distributor cap and...

The Racer X Fabrication 1zz valve cover adapter plate for the 91-95 Toyota MR2 allows you to easily adapt the 1zz coils to the Gen 2 and Gen 3 valve cover. The adapter plate comes with the hardware needed to complete the installation. *Note: If you are using the OEM intake manifold the coil adapter plate will require modification on coil #2 to clear the throttle body inlet. What's Included (1) 1ZZ valve cover adapter plate Compatibility 1991-1995 Toyota MR2 (Gen 2, Gen 3, Gen 4) Installation...

The Racer X Fabrication crank trigger wheel for the 1991-1995 Toyota MR2 is a direct replacement trigger wheel for the Racer X MR2 crank trigger kit. The trigger wheels come in standard 12 tooth, 36-1, and 60-2 trigger wheels. What's Included (1) Racer X 430 Stainless steel trigger wheel Compatibility 1991-1995 Toyota MR2 Installation Install Time: 1 hour Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X...