22+ TOYOTA GR86 / SUBARU BRZ

The Racer X Fabrication rear upper control arms for the 2022+ Toyota GR86 / Subaru BRZ are the best option for adjusting camber on the rear of your vehicle. The pivot point allows for minimal impact on toe during camber adjustment. The tubular design allows for a weight savings of 4 lbs per control arm (8 lbs of total weight reduction), by far one of the largest weight savings for suspension components. The upper control arms retain the OEM wire harness mounting bracket and use urethane...

The Racer X Fabrication front lower control arms for the 22+ Toyota GT86 / Subaru BRZ were designed to reduce weight and increase rigidity. The OEM front lower control arms have been known to bend and flex under load. The Racer X control arms eliminate this by using light weight 4130 Chromoly tubing and chromoly rod ends. The control arms were designed in CAD from the OEM model to match and follow the small angle that is located at the rear of the control arm. The arms allow for on vehicle...

The Racer X Fabrication carbon fiber front strut tower brace for the 2022+ Toyota GR86 / Subaru BRZ was designed to reduce deflection between the strut towers commonly experienced during spirited driving or competition. The Racer X strut tower brace adds to the OEM braces and increases rigidity while improving steering response. The assembly is comprised of rolled carbon fiber tubing and CNC machined 6061-T6 aluminum mounts, making it lighter and stronger than many strut tower braces found on...

Why it works The Racer X Fabrication Catch can for the 2022+ Subaru BRZ / Toyota GR86 was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air / oil from the PCV or crankcase, and through a series of filters and baffles, keeps the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they first pass through a micron stainless steel sintered filter to begin...

The Racer X Fabrication rear toe links for the 2022+ Toyota GR86 / Subaru BRZ offer the ability to give your vehicle proper toe adjustment after changing your camber beyond OEM specifications. Offers complete adjustability of toe on the vehicle. The rear toe links also come with bump steer adjustment, which helps to correct suspension geometry after lowering. The rear toe links are CNC machined from 6061-T6 aluminum to reduce weight, improve strength and increase rigidity. Comes standard...

The Racer X Fabrication sway bar links for the 22+ Toyota GT86 / Subaru BRZ improve rigidity and fit and are perfect for racing and autocross. Will work with the OEM or aftermarket strut bar. The adjustable sway bar end links are machined from 6061-T6 aluminum and come with aluminum spacers to fit into the control arm which attach to a spherical rod end. The quality spherical rod ends used on the bottom provide for longevity and a rattle free ride. The top uses a ball joint that is designed to...

The Racer X Fabrication front end links for the 2022+ Toyota GT86 / Subaru BRZ are perfect for enthusiasts who are looking for more clearance over OEM front end link and want adjustability. The front end links are CNC machined from 6061-T6 aluminum and feature teflon lined rod ends with pressed studs. The completed assembly increases stiffness and strength over the OEM front end links. The end links come standard with a black anodized finish to prevent corrosion. What's Included (2) Front end...

Proper installation of the Racer X Fabrication adjustable front tie rod end kit for the 22+ Toyota GR86 / Subaru BRZ will allow your vehicle to reduce understeer and improve handling characteristics. The adjustable front tie rod end kit features a 6061-T6 aluminum hex stock that is CNC machined to accept the OEM thread pitch and the mating end uses a common rod end size. The CNC machined hex is threaded on both ends and allows for adjustment on the vehicle, making alignments a breeze. Comes...

The Racer X Fabrication battery brace for the 22+ Toyota GR86 / Subaru BRZ was designed to replace the OEM brace and increase aesthetic appearance. The Racer X battery brace is CNC machined from 6061-T6 aluminum, and uses the OEM M6 nuts. The brace is anodized black for corrosion resistance and finally laser etched with the Racer X logo. What's Included (1) Racer X battery tie down Compatibility 22+ Toyota GR86 22+ Subaru BRZ All Subaru Models Installation Install Time: 5 mins Installation...

What's Included (1) Racer X e-brake boot Compatibility 2022+ Toyota GR86 2022+ Subaru BRZ Installation Install Time: 5 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road.--> ...

What's Included (1) Racer X shift boot Compatibility 2022+ Toyota GR86 2022+ Subaru BRZ Installation Install Time: 5 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road.--> ...

The Racer X Fabrication cam solenoid cap for the 2022+ Toyota GR86 / Subaru BRZ is mainly an appearance modification, but do provide protection for the cam AVCS solenoids that are exposed in the engine bay. The cam solenoid caps are CNC machined from 6061-T6 aluminum for a perfect fit. The cam solenoids caps come standard in a raw finish or black anodized, we also offer them in an array of colors for an additional charge. What's Included (4) Cam solenoid caps (8) M6 x 20 Stainless steel socket...

The Racer X "Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Fury" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Fury" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Destructor" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Destructor" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...