SCION FR-S / SUBARU BRZ / TOYOTA GT86

The Racer X Fabrication battery brace for the Scion FR-S / Subaru BRZ / Toyota GT86 was designed to replace the OEM brace and increase aesthetic appearance. The Racer X battery brace is CNC machined from 6061-T6 aluminum, and uses the OEM M6 nuts. The brace is anodized black for corrosion resistance and finally laser etched with the Racer X logo. What's Included (1) Racer X battery tie down Compatibility 2013+ Scion FR-S 2013+ Subaru BRZ 2013+ Toyota GT86 All Subaru Models Installation Install...

Does not include shifter surrround. What's Included (1) Racer X shift boot Compatibility 2013-2020 Scion FR-S 2013-2020 Subaru BRZ 2013-2020 Toyota GT86 Installation Install Time: 5 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road.--> ...

What's Included (8) Urethane bushings (4) Bushing inserts (1) Urethane grease Compatibility Racer X FR-S / BRZ / GT86 Rear Upper Control Arms Racer X WRX / STI Rear Upper Control Arms Installation Install Time: Install Time: 1 to 2 hours Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X Fabrication oil cap for the Scion FR-S / Subaru BRZ / Toyota GT86 is a perfect aesthetic addition to any engine bay!! The oil cap is slightly smaller than the plastic OEM cap, which is perfect for anyone using an oil cooler adapter plate that has to be rotated for clearance by the OEM intake system. The oil cap is CNC machined from 6061-T6 aluminum and uses a viton o-ring for a perfect seal. The logo orientation is facing the front of vehicle when fully tightened, and the cap...

What's Included (4) M6x1 hex bolt (4) M6 lock washer (4) M6 flat washer (2) M6x1 SS socket cap screw (2) Racer X mounting bracket Compatibility 2013+ Scion FR-S 2013+ Subaru BRZ 2013+ Toyota GT86 Installation Install Time: 1 hour Installation Guide: Bottom Mount--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X Fabrication noise generator delete kit for the Scion FR-S / Subaru BRZ / Toyota GT86 was designed to eliminate the OEM noise generator. The noise generator is the hose coming off the OEM intake elbow, routes to the side of the intake manifold and finally into the cabin by the passenger footwell. The delete kit eliminates this unnecessary OEM feature that many enthusiasts find annoying and also eliminates clutter in the engine bay. The kit features a 6061-T6 aluminum plug that has...

The Racer X Fabrication cam solenoid cap for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 is mainly an appearance modification, but do provide protection for the cam AVCS solenoids that are exposed in the engine bay. The cam solenoid caps are CNC machined from 6061-T6 aluminum for a perfect fit. The cam solenoids caps come standard anodized black. What's Included (4) Cam solenoid caps (8) M6 x 20 Stainless steel socket head screw Compatibility 2013-2020 Scion FR-S 2013-2020 Subaru BRZ...

The Racer X Fabrication MAF flange for the 2013+ Scion FR-S / Subaru BRZ / Toyota GT86 comes in your choice of sizing so you can build the ultimate air intake or get the right fit for you turbo kit. The MAF sensor flange is CNC machined from 6061-T6 aluminum for a perfect fit. What's Included (1) MAF sensor flange (2) 8-32 Stainless steel socket head screw Compatibility 2013+ Scion FR-S 2013+ Subaru BRZ 2013+ Toyota GT86 Installation Install Time: 15 to 30 mins Installation Guide-->...

What's Included (1) Tapered stud and hardware Compatibility Racer X FR-S / BRZ / GT86 Rear Toe Links Racer X 22+ BRZ / GR86 Rear Toe Links Racer X WRX / STI Rear Toe Links Install Time: Install Time: 1 hour Alignment recommended after installation. Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X "Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Delrin Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined Derlrin and the adjustable aluminum adapter is threaded for an M12 x 1.25 thread pitch. It is laser etched with your choice of shift pattern and color. Weight is approximately 3.9 ounces. What's Included (1) Racer X "Delrin Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation...

The Racer X "Fury" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Fury" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Destructor" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Destructor" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X Fabrication front lower control arm ball joints for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 are designed to be a direct replacement for the OEM ball joint (20206CA000). The OEM ball joint is no longer available for sale from Subaru, if you have to replace your ball joint it now requires that you purchase the whole control arm. The starting cost for one control arm is around $185.00, with typical service life around 30,000 miles, that can get expensive. We decided to...

What's Included (1) 1"-12 Bung nut adjuster (1) 1"-12 RH jam nut (1) 3/4"-16 LH rod end (1) 3/4"-16 LH jam nut Aluminum bushings (optional) Spacers (optional) Compatibility 2008-2014 Subaru WRX / STI 2015+ Subaru WRX / STI Installation Install Time: 1 to 2 hours Alignment recommended after installation. Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition...