2015 - 2021 WRX / STI (VA)

The Racer X Fabrication fender shrouds were designed for the 2008-2021 Subaru WRX / STI to clean up the engine bay and get rid of those boring OEM shrouds. Made from durable 5000 series aluminum and crafted to fit seamlessly in your engine bay. Made from high-quality aluminum and finished with a tough powder coat, these trim pieces are built to withstand the rigors of daily driving. They're also resistant to rust and corrosion, ensuring that they'll continue to look great for years to come....

What's Included (1) Racer X pulley cover Compatibility 2004+ Subaru WRX / STI Installation Install Time: Install Time: 15 - 30 minutes Difficulty Level: Installation Guide Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X Fabrication rear upper control arms for the 2008+ Subaru WRX / STI are the best option for adjusting camber on the rear of your vehicle. The pivot point allows for minimal impact on toe during camber adjustment. The use of urethane bushings with zinc-plated steel inserts reduce movement and increase response. The tubular design allows for a weight savings of 4 lbs per control arm (8 lbs of total weight reduction), which is one of the largest weight savings for suspension...

The Racer X Fabrication 4130 chromoly front lower control arms for the 2015 - 2021 Subaru WRX / STI are one of the limited options available for adjusting camber and caster. The durable chromoly steel construction allows for simple, on vehicle, adjustment using adjustable threaded adapters and chromoly rod ends. The tubular design provides a 1 lb weight savings per side (2 lbs total weight saving) over the aluminum OEM version of the control arm. The Racer X front lower control arms retain the...

Proper installation of the Racer X Fabrication adjustable front tie rod end kit for the 2008+ Subaru WRX / STI will allow your vehicle to reduce understeer and improve handling characteristics. The adjustable front tie rod end kit features a 6061-T6 aluminum hex stock that is CNC machined to accept the OEM thread pitch and the mating end uses a common rod end size. The CNC machined hex is threaded on both ends and allows for adjustment on the vehicle, making alignments a breeze. Comes standard...

The Racer X Fabrication sway bar links for the Subaru WRX / STI improve rigidity and fit and are perfect for racing and autocross. Will work with the OEM or aftermarket strut bar. The adjustable sway bar end links are machined from 6061-T6 aluminum and come with aluminum spacers to fit into the control arm which attach to a spherical rod end. The quality spherical rod ends used on the bottom provide for longevity and a rattle free ride. The top uses a ball joint that is designed to correctly...

The Racer X Fabrication rear toe links for the 2008+ Subaru WRX / STI offer the ability to give your vehicle proper toe adjustment after changing your camber beyond OEM specifications. Offers complete adjustability of toe on the vehicle. The rear toe links also come with bump steer adjustment, which helps to correct suspension geometry after lowering. The rear toe links are CNC machined from 6061-T6 aluminum to reduce weight, improve strength and increase rigidity. Comes standard anodized...

The Racer X Fabrication front end links for the 2015+ Subaru WRX / STI are designed to increase rigidity between the chasis and the sway bar, especially when using a larger front sway bar. The end links are CNC machined from 6061-T6 aluminum and anodized black to resist against corrosion. What's Included (2) Racer X front end links (4) Teflon lined spherical bearings (installed) (4) CNC machined bushings (4) Hex head bolts, Hi collar loc washers Compatibility 2015+ Subaru WRX 2015+ Subaru STI...

The Racer X "Delrin Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined Derlrin and the adjustable aluminum adapter is threaded for an M12 x 1.25 thread pitch. It is laser etched with your choice of shift pattern and color. Weight is approximately 3.9 ounces, height is 2.5" and diameter is 1.95". What's Included (1) Racer X "Delrin Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation...

The Racer X Fabrication battery brace for the Subaru WRX / STI was designed to replace the OEM brace and increase aesthetic appearance. The Racer X battery brace is CNC machined from 6061-T6 aluminum, and uses the OEM M6 nuts. The brace is anodized black for corrosion resistance and finally laser etched with the Racer X logo. What's Included (1) Racer X battery tie down Compatibility All Subaru Models Installation Install Time: 5 mins Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X Fabrication oil cap for the Subaru WRX / STI is a perfect aesthetic addition to any engine bay!! The oil cap is slightly smaller than the plastic OEM cap, which is perfect for anyone using an oil cooler adapter plate that has to be rotated for clearance by the OEM intake system. The oil cap is CNC machined from 6061-T6 aluminum and uses a viton o-ring for a perfect seal. The logo orientation is facing the front of vehicle when fully tightened, and the cap features hexagon spline...

The Racer X Fabrication cam solenoid cap for the Subaru WRX is mainly an appearance modification, but do provide protection for the cam AVCS solenoids that are exposed in the engine bay. The cam solenoid caps are CNC machined from 6061-T6 aluminum for a perfect fit. The cam solenoids caps come standard anodized black. What's Included (4) Cam solenoid caps (8) M6 x 20 Stainless steel socket head screw Compatibility 2015+ Subaru WRX Installation Install Time: 30 mins to 1 hour Installation...

What's Included (8) Urethane bushings (4) Bushing inserts (1) Urethane grease Compatibility Racer X FR-S / BRZ / GT86 Rear Upper Control Arms Racer X WRX / STI Rear Upper Control Arms Installation Install Time: Install Time: 1 to 2 hours Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

What's Included (1) Tapered stud and hardware Compatibility Racer X FR-S / BRZ / GT86 Rear Toe Links Racer X 22+ BRZ / GR86 Rear Toe Links Racer X WRX / STI Rear Toe Links Install Time: Install Time: 1 hour Alignment recommended after installation. Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X "Debbie" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Debbie" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...

The Racer X "Fury" shift knob is designed to fit comfortably in your hand and increases feedback during shifting. The shift knob is CNC machined 6061-T6 aluminum and threaded for an M12 x 1.25 thread pitch. It is anodized black for a durable finish and laser etched with your choice of shift pattern. What's Included (1) Racer X "Fury" shift knob Compatibility Universal (M12 x 1.25 thread pitch) Installation Install Time: 1 min Installation Guide--> Proposition 65 WARNING: Cancer and...