Products 1-16 of 19
Show
Availability: In Stock
Item #: 041201 -
The Racer X Fabrication coolant neck for the 2012+ Chevy Sonic 1.4L, 2011+ Chevy Cruze 1.4L and 2015-2019 Chevy Trax 1.4L is a direct replacement for the OEM coolant neck. If you have ever found that you have become stranded in the middle of nowhere thanks to the trusty OEM coolant neck rupturing, you might want to consider upgrading to the Racer X cast aluminum coolant neck. We added a 1/8" NPT port which can be used with an aftermarket temperature gauge or plugged with the provided hardware....
Availability: In Stock
Item #: 0X1003-4 -
The Racer X Fabrication catch can for the 2012+ Chevy Sonic was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air oil mixture from the PCV or crankcase, and through a series of baffles, retains the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they are diverted around the spring/inlet tube. This initial diversion creates a swirling effect that is...
Availability: Out of Stock
Item #: 040801 -
The Racer X Fabrication cold air intake box for the 2012+ Chevy Sonic 1.4L is designed to improve performance through the full RPM range. We started with aluminum sheet that is CNC cut, and bent to form the air box. The panels are then TIG welded along with our 4.5” velocity stack that is specifically designed for the Sonic 1.4L engine. The velocity stack features a full bell radius, and tapers down to the OEM MAF diameter for the correct airflow. The velocity stack and taper increase airmass...
Availability: Made to Order
Item #: 040101 -
The Racer X Fabrication intake manifold for the 2012+ Chevy Sonic and 2011-2016 Chevy Cruze was designed to increase power in the mid to high RPM range. The manifold starts with a CNC machined intake flange that features common sized o-ring gaskets for a perfect seal to the cylinder head. The flange is angled for the correct fuel injector location and matches the OEM placement. We also added a NPT port to allow for a simple PCV fix over the OEM intake manifold. This allows use of our optional...
Availability: Out of Stock
Item #: 040004 -
The Racer X Fabrication engine rotation delete kit for the 2013+ Chevy Sonic was made to drastically reduce the rotation of the engine under load. It’s no secret, the Chevy Sonic was sold with only 3 engine mounts this leads to a significant amount of engine rotation which is great for daily driving, but absolutely horrible for performance. We decided an engine brace was the best way to eliminate the engine movement under load, this allows you to keep the spongy OEM mounts while still...
Availability: In Stock
Item #: 040701 -
The Racer X Fabrication fuel rail kit for the 2012+ 1.4L Chevy Sonic is a perfect fit for enthusiasts that need additional fueling. The Racer X fuel rail kit allows for common AN fittings to be used instead of being stuck with the OEM fuel line fittings. The AN fittings let you add an external fuel rail pressure regulator and run a return line back to the OEM fuel tank. The fuel rail can be used with the OEM intake manifold or the Racer X Fabrication intake manifold. The fuel rail comes...
Availability: In Stock
Item #: 041103 -
The Racer X Fabrication shift boot and surround for the MT Chevy Sonic is a great addition to any interior. The shift boot and surround replaces the OEM shifter surround. The kit mounts directly to the OEM mounting locations using the supplied surround and is an easy way to update your interior. The Racer X shift boot is sewn in house from the highest quality materials. We offer the shift boot in a few different material options: Alcantara, laser etched Alcantara, and black Italian leather....
Availability: Made to Order
Item #: 040501 -
The Racer X Fabrication front mount intercooler for the 2012 to 2018 Chevy Sonic is the perfect addition for the the enthusiast that needs additional cooling. The Racer X intercooler starts with a larger core than OEM and increased fin density, which translates into increased cooling capacity at higher power output. The OEM intercooler will heat soak and reduce power during spirited driving or longer duration RPM pulls. The Racer X intercooler is built around a high performance intercooler...
Availability: In Stock
Item #: 040702 -
The Racer X Fabrication fuel pump hanger for the 2012+ Chevy Sonic is designed to use a walbro style fuel pump. The fuel pump hanger allows you to remove the OEM pump which runs out of fuel at higher horsepower output. The fuel pump hanger kit can be used with a return style fuel system, which is mandatory when using larger injectors and a fuel pressure regulator. The fuel pump hanger kit is the ultimate fuel system solution and makes for a clean and simple installation when using larger than...
Availability: In Stock
Item #: 040006 -
What's Included (1) Racer X ECM cover Compatibility 2012+ Chevrolet Sonic Installation Install Time: 5 to 10 minutesDifficulty Level: Installation Guide Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
Availability: In Stock
Item #: 040703 -
The Racer X Fabrication flex fuel kit for the 2012+ Chevy Sonic allows for the use of E85 fuel. The flex fuel kit uses a latest generation flex fuel sensor that is lighter and has faster response times compared to previous models. We include a harness that needs to be wired into your existing OEM electrical system. In addition, a simple fuse block allows for the adaptation of a switched 12v+ power source that can be conveniently wired into the engine bay fuse box. The kit requires tuning to...
Availability: In Stock
Item #: 0X0411-4 -
The Racer X Fabrication front end links for the 2012+ Chevy Sonic are perfect for enthusiasts who are looking for more clearance over OEM front end link and want adjustability. Construction The front end links are CNC machined from 6061-T6 aluminum and feature teflon lined rod ends with pressed studs. The completed assembly increases stiffness and strength over the OEM front end links. The end links come standard with a black anodized finish to prevent corrosion. What's Included (2) Front end...
Availability: In Stock
Item #: 040001 -
The Racer X Fabrication valve cover insert for the 2012+ Chevy Sonic is a great aesthetic addition to any engine bay. The insert eliminates the OEM bulky plastic cover and is replaced with a sleek aluminum anodized insert. The insert uses (2) bushings below to keep it at the correct height while still allowing the correct amount of torque to keep the valve cover gasket compressed. The valve cover insert comes standard with a black anodized finish and the Racer X logo laser etched in the upper...
Availability: In Process
Item #: 040002 -
The Racer X Fabrication coolant tank for the 2012+ Chevy Sonic replaces the OEM coolant tank and relocates it to clean up the engine bay. The Racer X coolant tank is CNC cut and formed before finally being TIG welded. The coolant tank allows you to completely remove the OEM tank that is large and takes up a bit of space. The new location of the coolant tank is placed on the front of the OEM battery tray and is ONLY compatible with the Odissey PC680 battery and the Racer X battery tie down. The...
Availability: In Stock
Item #: 040201-B -
The Racer X Fabrication exhaust manifold flange for the 2012+ Chevy Sonic 1.4L is CNC laser cut from cold rolled steel. It is designed to be used with 1.25” schedule 10 pipe fittings. The flange is 1/2” thick and ready for welding, a heat sink is highly recommend to reduce warping during the welding process. What's Included (1) Racer X exhaust manifold flange Compatibility 2012+ Chevy Sonic Installation Install Time: N/A Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive...
Availability: Out of Stock
Item #: 041101 -
The Racer X Fabrication shifter bushings for the 2012+ Chevy Sonic were designed to eliminate additional movement in the shifter. During shifting, the assembly moves up to 1/16 of an inch. This movement creates less than desirable feedback with spirited driving and can lead to missed shifts or grinding. The CNC machined shifter bushings we provide will reduce the movement from 1/16 of an inch (0.062”) to 1/128 of an inch (0.007”). This reduction in movement allows for clean and crisp shifting...