Spring SALE Take 10% off your purchase!

Item #: 010406
Availability: In Stock
Usually ships In 1 - 2 business days
Price: $49.00

    Quantity:

    The Racer X Fabrication rear subframe inserts for the Toyota MR2 were designed to reduce the diameter between the bolt and subframe. The gap between the 4 bolts and the subframe ranges from 0.04” to 0.187” (1mm-4.75mm). This gap allows the subframe to articulate under loading that happens during acceleration. The Racer X subframe inserts reduce this gap while still allowing the subframe to bolt into the factory position. The inserts increase power transfer and improve feedback during acceleration. The inserts are CNC machined from 7075-T6 aluminum and designed to work with the OEM bolts from Toyota.

    What's Included

    • (2) 7075-T6 Insert A
    • (2) 7075-T6 Insert B
    • (2) 7075-T6 Insert C
    • (2) 7075-T6 Insert D

    Compatibility

    • 1991-1995 Toyota MR2
    • Toyota MR2 Gen 2
    • Toyota MR2 Gen 3
    • Toyota MR2 Gen 4

    Installation

    Proposition 65

    Off Road Use Only

    WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road.

    Overall Customer Rating of 1 Reviews:
    review-star review-star review-star review-star review-star

    Rating:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    I tried these as I had very unsettling symptoms when cornering hard. Worked out the subframe was shifting side to side. These fixed it perfectly. Install is not the easiest to line them all up. Ideally you need to remove the lower control arms, exhaust bracket and rear engine mount. Retorque the 4 bolts with the car back on the ground.