Products 1-4 of 4
Show
Availability: In Stock
Item #: 010405 -
The Racer X Fabrication carbon fiber rear end links for the 1991 - 1995 Toyota MR2 are perfect for enthusiasts who are looking for more clearance over OEM rear end links and want adjustability. The rear end link bodies are made from carbon fiber and feature teflon lined rod ends with pressed studs. The completed assembly increases stiffness and strength over the OEM rear end links. What's Included (2) Rear end link assemblies (4) Loc nuts (8) Washers Compatibility 1991-1995 Toyota MR2...
Availability: In Stock
Item #: 010403 -
The Racer X Fabrication rear tie rods for the 1991-1995 Toyota MR2 directly replace the OEM tie rods. The Racer X tie rods are made from 4130 chromoly steel, feature female chromoly rod ends and CNC laser cut and formed mounting brackets. The female rod end allows for simple adjustment outside of the MR2 subframe which makes alignments quick and easy. The offset bushing design pushes the rod end away from the subframe which allows for additional clearance under suspension compression a detail...
Availability: In Stock
Item #: 010406 -
The Racer X Fabrication rear subframe inserts for the Toyota MR2 were designed to reduce the diameter between the bolt and subframe. The gap between the 4 bolts and the subframe ranges from 0.04” to 0.187” (1mm-4.75mm). This gap allows the subframe to articulate under loading that happens during acceleration. The Racer X subframe inserts reduce this gap while still allowing the subframe to bolt into the factory position. The inserts increase power transfer and improve feedback during...
New!
Availability: In Stock
Item #: 010404 -
The Racer X Fabrication rear strut tower caps for the Toyota MR2 were designed to keep dust and debris out, while allowing room for aftermarket coilovers. What's Included (2) Racer X strut tower cap Compatibility 1991-1995 Toyota MR2 Installation Install Time: 5 minutes Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on...