Products 1-6 of 6
Show
Availability: In Stock
Item #: 0X1003-2 -
The Racer X Fabrication catch can for the 2013+ Scion FR-S / Subaru BRZ / Toyota GT86 was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air oil mixture from the PCV or crankcase, and through a series of baffles, retains the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they are diverted around the spring/inlet tube. This initial diversion creates...
Availability: In Stock
Item #: 0X1004-2 -
The Racer X Fabrication thermostatic oil adapter plate kit for the 2013+ Scion FR-S / Subaru BRZ / Toyota GT86 is available as a separate kit for those that would like to build their own oil cooler kit. Construction The adapter plate and spacer are CNC machined from 6061-T6 aluminum. The thermostatic adapter plate and the spacer use square profile O-ring for a perfect seal to the OEM oil filter location. The M20x1.5 threaded adapter mates to the oil filter location and retains the same...
Availability: In Stock
Item #: 021002 -
The Racer X Fabrication cylinder head plate for the 2013+ Scion FR-S / Subaru BRZ / Toyota GT86 is great for stopping that pesky oil leak and requires no messy sealant. Installation can be performed from the engine bay. The quattro o-ring seals on all sides instead of just two, this ensures that you will not run into any future issues with the cylinder head plate. Construction The cylinder head plate was created after our shop car started leaking oil onto the exhaust. We took the stamped steel...
Availability: In Stock
Item #: 021004 -
The Racer X Fabrication Oil cooler kit for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 is designed to keep oil temperature in check! During hard driving and racing, oil temperatures can increase beyond suggested limits. High oil temperature can reduce power and degrade the oil’s ability to lubricate properly, preventing it from performing its primary function. Adding an external oil cooler, helps to reduce the temperature during spirited driving and racing. Construction The Racer X...
Availability: In Stock
Item #: 020004 -
The Racer X Fabrication oil cap for the Scion FR-S / Subaru BRZ / Toyota GT86 is a perfect aesthetic addition to any engine bay!! The oil cap is slightly smaller than the plastic OEM cap, which is perfect for anyone using an oil cooler adapter plate that has to be rotated for clearance by the OEM intake system. The oil cap is CNC machined from 6061-T6 aluminum and uses a viton o-ring for a perfect seal. The logo orientation is facing the front of vehicle when fully tightened, and the cap...
Availability: In Stock
Item #: 021004-B -
What's Included (4) M6x1 hex bolt (4) M6 lock washer (4) M6 flat washer (2) M6x1 SS socket cap screw (2) Racer X mounting bracket Compatibility 2013+ Scion FR-S 2013+ Subaru BRZ 2013+ Toyota GT86 Installation Install Time: 1 hour Installation Guide: Bottom Mount--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...