FUEL SYSTEM / INJECTORS

The Racer X Fabrication fuel pump hanger kit for the Toyota MR2 is the ultimate solution for your fuel system!! The hanger kit is designed to work with in tank fuel pumps and provides an easier solution for upgrading your fuel supply and return lines for higher horsepower builds that are starved of fuel. The kit works with Walbro fuel pumps, OEM fuel pump, and the Aeromotive fuel pump. (This kit is NOT compatible with the Bosch fuel pump) Construction The mounting lid, support rod and fuel...

The Racer X Fabrication fuel rail kit for the 1991-1995 Toyota MR2 is a great solution for those that have run out of fuel using the OEM injectors. The fuel rail kit allows you to use top feed fuel injectors that are more common and typically provided in larger sizes than side feed injectors. The Racer X fuel rail is designed for 14mm top and bottom o-ring injectors with a 60mm length. We offer the choice of -6AN fittings or -8AN fittings if you need a lot of fuel.  **Please...

The Racer X Fabrication Bosch fuel pressure regulator adapter is designed to be used with the popular Bosch fuel pressure regulators. The bosch 3 bar and 4 bar regulators are often used on many of today's modern fuel systems in OEM applications. The Racer X adapter allows the use of the Bosch 3 bar and 4 bar regulator to be directly adapted to any 3/4-16 RH threaded fuel rail or -8AN ORB. The adapter is threaded for a -8AN ORB for the return line and comes with a -6AN to 8AN ORB fitting. The...

What's Included (4) Injector adatper 11mm - 14mm Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 2 Toyota MR2 Gen 3 Installation Install Time: 30 mins - 1 hour Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X Fabrication fuel pump relay bracket for the 91-95 Toyota MR2 is designed to clean up the engine bay. The bracket allows you to eliminate the OEM fuel injector resistor pack and then mount the fuel pump relay and fuel pump resistor pack onto the Racer X Fabrication bracket. The bracket is CNC laser cut from 6000 series aluminum and is powder coated wrinkle black for corrosion resistance and an OEM appearance. **NOTE** This product will eliminate the OEM injector resistor pack,...

The Racer X Fabrication OEM FPR adapter for the 1991-1995 Toyota MR2 will allow you to replace your fuel rail and retain the OEM fuel pressure regulator. When it comes time to replace your OEM fuel rail with a top feed fuel rail for the Gen 2 or Gen 3 it often means replacing your OEM FPR as well. The Racer X FPR adapter allows you to retain the OEM fuel pressure regulator and simplify your installation. The FPR adapter is threaded for -8AN rails (3/4-16) and features a viton o-ring seal that...

The Racer X Fabrication Flex fuel kit for the 1991-1995 Toyota MR2 will allow you to use E85 with proper tuning from your EMS. The flex fuel kit mounts the sensor on the transmission roughly 1 foot from the OEM fuel filter. This allows for simple and short fuel hose routing to and from the sensor. The mounting bracket, sensor tie down, and rock guard are all CNC machined from 6061-T6 aluminum. Finally the components are anodized black for corrosion resistance and laser etched with the Racer X...