SUSPENSION

The Racer X Fabrication rear upper control arms for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 are the best option for adjusting camber on the rear of your vehicle. The pivot point allows for minimal impact on toe during camber adjustment. The tubular design allows for a weight savings of 4 lbs per control arm (8 lbs of total weight reduction), by far one of the largest weight savings for suspension components. The upper control arms retain the OEM wire harness mounting bracket and...

The Racer X Fabrication front lower control arms for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 were designed to reduce weight and increase rigidity. The OEM front lower control arms have been known to bend and flex under load. The Racer X control arms eliminate this by using light weight 4130 Chromoly tubing and chromoly rod ends. The control arms were designed in CAD from the OEM model to match and follow the small angle that is located at the rear of the control arm. The arms allow...

The Racer X Fabrication carbon fiber front strut tower brace for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 was designed to reduce deflection between the strut towers commonly experienced during spirited driving or competition. The Racer X strut tower brace adds to the OEM braces and increases rigidity while improving steering response. The assembly is comprised of rolled carbon fiber tubing and CNC machined 6061-T6 aluminum mounts, making it lighter and stronger than many strut tower...

The Racer X Fabrication rear toe links for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 offer the ability to give your vehicle proper toe adjustment after changing your camber beyond OEM specifications. Offers complete adjustability of toe on the vehicle. The rear toe links also come with bump steer adjustment, which helps to correct suspension geometry after lowering. The rear toe links are CNC machined from 6061-T6 aluminum to reduce weight, improve strength and increase rigidity....

The Racer X Fabrication sway bar links for the Scion FR-S / Subaru BRZ / Toyota GT86 improve rigidity and fit and are perfect for racing and autocross. Will work with the OEM or aftermarket strut bar. The adjustable sway bar end links are machined from 6061-T6 aluminum and come with aluminum spacers to fit into the control arm which attach to a spherical rod end. The quality spherical rod ends used on the bottom provide for longevity and a rattle free ride. The top uses a ball joint that is...

The Racer X Fabrication carbon fiber front end links for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 are perfect for enthusiasts who are looking for more clearance over OEM front end link and want adjustability. The front end link bodies are made from carbon fiber and feature teflon lined rod ends with pressed studs. The completed assembly increases stiffness and strength over the OEM front end links. What's Included (2) Front end link assemblies (4) Loc nuts (8) Washers Compatibility...

The Racer X Fabrication front end links for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 are perfect for enthusiasts who are looking for more clearance over OEM front end link and want adjustability. The front end links are CNC machined from 6061-T6 aluminum and feature teflon lined rod ends with pressed studs. The completed assembly increases stiffness and strength over the OEM front end links. The end links come standard with a black anodized finish to prevent corrosion. What's...

Proper installation of the Racer X Fabrication adjustable front tie rod end kit for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 will allow your vehicle to reduce understeer and improve handling characteristics. The adjustable front tie rod end kit features a 6061-T6 aluminum hex stock that is CNC machined to accept the OEM thread pitch and the mating end uses a common rod end size. The CNC machined hex is threaded on both ends and allows for adjustment on the vehicle, making alignments...

What's Included (8) Urethane bushings (4) Bushing inserts (1) Urethane grease Compatibility Racer X FR-S / BRZ / GT86 Rear Upper Control Arms Racer X WRX / STI Rear Upper Control Arms Installation Install Time: Install Time: 1 to 2 hours Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

What's Included (1) Tapered stud and hardware Compatibility Racer X FR-S/BRZ/GT86 Front Tie Rod Ends Install Time: Install Time: 1 hour Alignment recommended after installation. Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

What's Included (1) Tapered stud and hardware Compatibility Racer X FR-S/BRZ/GT86 Rear Toe Links Install Time: Install Time: 1 hour Alignment recommended after installation. Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...

The Racer X Fabrication front lower control arm ball joints for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 are designed to be a direct replacement for the OEM ball joint (20206CA000). The OEM ball joint is no longer available for sale from Subaru, if you have to replace your ball joint it now requires that you purchase the whole control arm. The starting cost for one control arm is around $185.00, with typical service life around 30,000 miles, that can get expensive. We decided to...