Products 129-144 of 174
Show
Availability: In Stock
Item #: 040701-X -
The Racer X Fabrication fuel rail kit for the 2011-2016 1.4L Chevy Cruze is a perfect fit for enthusiasts that need additional fueling. The Racer X fuel rail kit allows for common AN fittings to be used instead of being stuck with the OEM fuel line fittings. The AN fittings let you add an external fuel rail pressure regulator and run a return line back to the OEM fuel tank. The fuel rail can be used with the OEM intake manifold or the Racer X Fabrication intake manifold. The fuel rail comes...
Availability: In Stock
What's Included (1) "Don't Drive Angry" decal (12" in width) Compatibility Universal Installation Install Time: 5 mins Installation Guide--> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. --> ...
Availability: In Stock
Item #: 020410 -
The Racer X Fabrication front lower control arm ball joints for the 2013-2020 Scion FR-S / Subaru BRZ / Toyota GT86 are designed to be a direct replacement for the OEM ball joint (20206CA000). The OEM ball joint is no longer available for sale from Subaru, if you have to replace your ball joint it now requires that you purchase the whole control arm. The starting cost for one control arm is around $185.00, with typical service life around 30,000 miles, that can get expensive. We decided to...
Availability: Out of Stock
Item #: 011006 -
The Racer X Fabrication oil return fitting for the 1991-1995 Toyota MR2 directly replaces the OEM turbo return fitting on the oil pan. The Racer X fitting is designed specifically for the 3SGTE Gen 3 oil pan. The fitting is CNC machined from 6061-T6 aluminum and is sized for -10 AN or -12 AN. These fittings allow for a simple solution to the oil return line on an aftermarket turbo. What's Included (1) Racer X oil pan return fitting -10AN or -12AN Compatibility 1991-1995 Toyota MR2 Installation...
Availability: In Stock
Item #: 010905 -
The Racer X Fabrication MR2 Gen 4 downpipe flange takes the hard work out of having a custom downpipe made for your engine swap. The flange is CNC laser cut from 1018 cold rolled steel and CNC machined for smooth transitionally airflow into the divorced dump tube. Divorced downpipes have often been proven to provide better power output by preventing turbulent airflow at the outlet of the exhaust turbine housing. The dump tube should typically be routed 12 to 18” downstream from the outlet of...
Availability: In Stock
Item #: 070902 -
What's Included (1) Racer X Cold Pipe Temp Sensor Compatibility 2023+ Toyota GR Corolla Installation Install Time: 1-2 hours Difficulty Level: Installation Guide --> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
Availability: In Stock
Item #: 070901 -
What's Included (1) Racer X Throttle Body Inlet Flange Compatibility 2023+ Toyota GR Corolla Installation Install Time: 1-2 hours Difficulty Level: Installation Guide --> Proposition 65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov Off Road Use Only WARNING: Racer X Fabrication products are intended for off-road / competition use only and may never be used on a public road. ...
Availability: In Stock
Item #: 010902 -
Availability: In Stock
Item #: 011204 -
The Racer X Fabrication coolant temp sensor plug for the 1991-1995 Toyota MR2 is used to relocate the OEM MR2 gen 2 sensor to the back side of the coolant tree on Gen 4 swap engines. When used in combination with the Gen 4 relocation plug. This simple conversion eliminates having to extend your wire harness for the sensor location. What's Included (1) Coolant temp sensor plug (1) Coolant temp sensor plug relocation fitting Compatibility 1991-1995 Toyota MR2 Gen 4 Installation Install Time:...
Availability: Out of Stock
Item #: 011302 -
The Racer X Fabrication flat bottom panels for the 91-95 Toyota MR2, are designed to be a direct replacement for the worn out, broken or busted OEM plastic panels. The OEM plastic panels are used to cover the fuel tank and the rear of the vehicle before the engine bay. The Racer X flat bottom panels are mounted from the front fascia to just before the engine bay. They are true flat bottom panels that use stand offs and additional mounting brackets to provide clearance between the body and...
Availability: In Stock
2014 Chevy Sonic RS 6 speed manual for sale, clean Michigan title. We are asking $18,000 or best offer. All reasonable offers will be considered, low ball offers will be ignored. Buyer must arrange pick up. Includes all OEM components that came with vehicle, with the exception of the OEM exhaust system. The list below is not comprehensive and additional components are included. OEM intake manifold OEM differential OEM turbo OEM fuel pump hanger OEM fuel rail OEM springs OEM coolant tank What's...
Availability: In Stock
Item #: 0X1003 -
The Racer X Fabrication catch can was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air oil mixture from the PCV or crankcase, and through a series of baffles, retains the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they are diverted around the spring/inlet tube. This initial diversion creates a swirling effect that is continued through the...
Availability: In Stock
Item #: 041201 -
The Racer X Fabrication coolant neck for the 2012+ Chevy Sonic 1.4L, 2011+ Chevy Cruze 1.4L and 2015-2019 Chevy Trax 1.4L is a direct replacement for the OEM coolant neck. If you have ever found that you have become stranded in the middle of nowhere thanks to the trusty OEM coolant neck rupturing, you might want to consider upgrading to the Racer X cast aluminum coolant neck. We added a 1/8" NPT port which can be used with an aftermarket temperature gauge or plugged with the provided hardware....
Availability: In Stock
Item #: 0X1003-4 -
The Racer X Fabrication catch can for the 2012+ Chevy Sonic was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air oil mixture from the PCV or crankcase, and through a series of baffles, retains the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they are diverted around the spring/inlet tube. This initial diversion creates a swirling effect that is...
Availability: Made to Order
Item #: 040101 -
The Racer X Fabrication intake manifold for the 2012+ Chevy Sonic and 2011-2016 Chevy Cruze was designed to increase power in the mid to high RPM range. The manifold starts with a CNC machined intake flange that features common sized o-ring gaskets for a perfect seal to the cylinder head. The flange is angled for the correct fuel injector location and matches the OEM placement. We also added a NPT port to allow for a simple PCV fix over the OEM intake manifold. This allows use of our optional...