OIL SYSTEM

The Racer X Fabrication catch can for the 1991-1995 Toyota MR2 was designed to reduce oil in the air stream when exiting the PCV and crankcase. The catch can / air oil separator works by intercepting the air oil mixture from the PCV or crankcase, and through a series of baffles, retains the oil in the catch can and allows the air to flow through. As the air and oil droplets enter the catch can they are diverted around the spring/inlet tube. This initial diversion creates a swirling effect that...

Tired of looking at your worn out oil cap! The Racer X Fabrication oil cap for the Toyota MR2 and Toyota Celica will clean things up and look great!! CNC machined right here at Racer X Fabrication from 6061-T6 aluminum and uses a viton o-ring for a perfect seal. What's Included (1) Oil Cap Compatibility 1991-1995 Toyota MR2 Toyota MR2 Gen 2 Toyota MR2 Gen 3 Toyota MR2 Gen 4 Installation Install Time: 1 min Installation Guide Proposition 65 WARNING: Cancer and Reproductive Harm...

The Racer X Fabrication BSPT oil pressure sensor adapter for the 1991-1995 Toyota MR2 / Celica was designed to eliminate the various fittings and adapters needed to use an aftermarket gauge. The OEM cylinder head for the 3SGTE is threaded using an 1/8" BSPT, which can cause several issues when trying to retain the OEM oil pressure sensor and add an aftermarket pressure gauge. The Racer X Fabrication BSPT adapter conveniently allows you to add an aftermarket gauge and keep the OEM oil pressure...

The Racer X Fabrication oil level block off plate for the 1991-1995 Toyota MR2 eliminates the OEM oil level sensor. The OEM oil level sensor is often removed by enthusiasts and replaced with sheet metal plates. Enter the Racer X oil level block off, the block off plate is CNC machined from 6061-T6 aluminum and includes a new o-ring seal. The block off plate works on the OEM MR2 oil pan or the Moroso oil pan. What's Included (1) Racer X oil level block off plate (1) O-ring (4) M6x1 SS button...

The Racer X Fabrication oil return fitting for the 1991-1995 Toyota MR2 directly replaces the OEM turbo return fitting on the oil pan. The Racer X fitting is designed specifically for the 3SGTE Gen 3 oil pan. The fitting is CNC machined from 6061-T6 aluminum and is sized for -10 AN or -12 AN. These fittings allow for a simple solution to the oil return line on an aftermarket turbo. What's Included (1) Racer X oil pan return fitting -10AN or -12AN Compatibility 1991-1995 Toyota MR2 Installation...